Is there a problem with your washing machine? You might want to try to fix it on your own. You can troubleshoot and attempt to find out why the washer is broken but there is a good chance you will want to call a professional to diagnose the issue and repair it. You don’t want to damage the appliance worse than it already is. Here are some of the most common problems homeowners experience with washing machines. You will want to hire a professional for washer repair if you identify one of these problems:
WASHER WON’T TURN ON
The first thing to check is if the washing machine is plugged in or if a circuit breaker tripped. The next possible problem is to balance the load and close the door tight. If the washer won’t turn on then there could be an issue with a timer, circuit, lid switch or door closure, electrical outlet or another issue requiring professional attention.
WASHER WON’T DRAIN
A washing machine should drain all of the water from the drum before a spin cycle starts. If there is a pool of water in the washing machine after a cycle then there is a chance the drain hose is clogged. If there is no clog, there could be a broken water pump or drive belt. Both repairs should be done by a technician from a local appliance repair service.
WASHER WON’T FILL
If the water isn’t filling up in the washing machine, the hose could be disconnected or twisted. The faucet could be shut off too. Look behind the appliance and see if any of these problems occur. Other reasons a washer won’t fill is if there is a clogged filter or if there is sediment buildup inside of the intake valve or if there is delayed cycle selection. You can call an appliance repairman to diagnose the issue if you are unable to.
WASHER FILLS & DRAINS AT SAME TIME
If the washer is filling the same time it is draining it will waste several gallons of water. This problem often occurs from a defective water inlet valve. Other causes include the water level switch, electrical circuit or air dome hose. Don’t attempt DIY washer repair for any of these issues. Call a professional.
WASHER WON’T SPIN
The first thing to check when a washing machine won’t spin is if the door is closed all the way. It is also a good idea to see if the belt is tight or worn. “If these aren’t issues, the problem could be the drive motor coupling or the clutch assembly might be the problem too. An appliance repairman near you can troubleshoot these washer problems,” according to John Hart, Owner Waukesha Appliance Repair.
WASHER VIBRATES EXCESSIVELY
Excessive vibration from a washing machine is often caused by an unbalanced load of clothing. The vibration could also occur if the washer is sitting unevenly. Damper pads beneath the legs can also be replaced and correct the problem. If these adjustments do not fix the problem you will want to call a professional appliance repair service.
WASHER MAKES LOUD NOISES
There are several causes for loud noises from washers. A loud noise could occur from a damaged pump motor and squealing noises mean the belt is worn. Grinding noises and crunching noises mean the agitator cogs are starting to slip and wear down. No noise is a good noise and it could mean a serious problem that needs professional attention.
HIRE AN APPLIANCE REPAIR COMPANY
You will want to hire a local appliance repair service if any of the issues above happen to your washing machine. You need to hire a service that is reliable and affordable and able to repair most brands – including GE, LG, Whirlpool, Sears and more. Ace Appliance Repair Index recommends the following service for washer repair. Find more in our directory:
Duncan Home Services
Triumph Appliance Repair of Troy
Hart Appliance Repair
Manton Appliance Service